Datamax E4203 User Manual Page 126
- Page / 176
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Appendix G
116 E-Class DPL Programmer’s Manual
W1c / W1C: DataMatrix
Valid Characters: Any eight-bit byte data
Variable Length (W1c): This is a two-dimensional matrix symbology comprised of square modules
arranged within a perimeter finder pattern. Two types are ECC 000 – 140 and ECC 200.
Specified Length (W1C): Same as the variable length, however, with a Byte Count Specifier values
0x00 through 0xFF can be used within the data string without conflicting with the DPL format record
terminators.
ECC 000 – 140 symbols: These square symbols can be any odd sizes from 9x9 to 49x49, which may
be specified in the fields kkk and lll. If the symbol is specified with even numbers of rows or
columns, the next largest odd value will be used. Input values greater than 49 or less than 9 will
cause the symbol to be automatically sized for the input character stream. The record structure is
expanded for visual clarity.
Record Structure: a W1 b c d eee ffff gggg [hhhh] iii j kkk lll mm…m
Where:
Field Valid Inputs Meaning
a
1,2,3, and 4 Rotation
W1
W1 Fixed value, extended barcode set
b
candC Lowercase selects the DataMatrix bar code, variable length
Uppercase selects the Datamatrix barcode with a Byte Count Specifier
c
1–9andA–O Module size horizontal multiplier
d
1–9andA–O Module size vertical multiplier
eee
000 – 999 No effect; must be numeric
ffff
0000 – 9999 Label position, row
gggg
0000 – 9999 Label position, column (see Appendix J)
[hhhh]
0000 to 9999 Optional string length specifier. Field termination is set by this byte
count. This decimal value includes all of the data following this byte
count field, but does not include itself.
iii
000, 050, 080, 100, 140 3-digit convolutional error correction level.
If any number other than one of these options is entered then the nearest
lesser value from the valid entries is used (e.g., selecting a value of 099
will cause an actual ECC value of 080 to be used).
j
0–6 Format identification, where:
0 - Automatically selects an encodation scheme based on the
characters to be encoded.
1 - Numeric data.
2 - Upper case alphabetic.
3 - Upper case alphanumeric and punctuation characters (period,
comma, hyphen, and slash).
4 - Upper case alphanumeric.
5 - ASCII, the full ASCII character set.
6 - Any 8-bit byte.
If a format identifier is selected which will not encode the input
character stream then the barcode symbol will not be printed. It is
recommended that the auto-encodation format identification be used
since it will select the best possible encoding scheme for the input
stream.
- Programmer’s Manual 1
- Part Number: 88-2265-01 2
- Revision: D 2
- Table of Contents 3
- Appendix A 8
- Appendix B 8
- Appendix C 8
- Getting to Know the Printer 13
- Control Codes 15
- Immediate Commands 17
- SOH B Toggle Pause 18
- SOH C Stop/Cancel 18
- SOH D SOH Shutdown 18
- SOH E Send Batch Quantity 19
- SOH F Send Status Byte 19
- System-Level Commands 21
- STX d Set Double Buffer Mode 23
- STX e Select Edge Sensor 24
- STX F Form Feed 24
- STX G Print Last Label Format 24
- STX I Image Downloading 25
- STX k Test RS-232 Port 26
- STX m Set Metric Mode 27
- STX o Cycle Cutter 28
- STX p Controlled Pause 28
- STX Q Clear All Modules 29
- STX q Clear Module 29
- STX S Set Feed Speed 29
- STX s Set Single Buffer Mode 30
- STX T Print Dot Pattern Label 30
- STX t Test DRAM Memory Module 30
- STX X Set Default Module 34
- STX x Delete File from Module 35
- STX Y Output Sensor Values 35
- STX y Select Font Symbol Set 36
- STX z Pack Module 36
- Extended System Commands 37
- STX Kb Backfeed Time Delay 38
- STX KC Get Configuration 39
- STX Kc Set Configuration 39
- STX KD Database Configuration 43
- STX KE Character Encoding 44
- STX Kf Set Present Distance 46
- Label-Formatting Commands 49
- A Set Format Attribute 50
- C Set Column Offset Amount 51
- F Font Attributes 53
- H Select Heat Setting 55
- M Select Mirror Mode 55
- P Set Print Speed 56
- Q Set Print Quantity 57
- R Set Row Offset Amount 58
- S Set Slew Speed 59
- Embedding 62
- ^ Set Count by Amount 64
- STX T Print Time and Date 65
- Font Loading Commands 67
- *c###E Character Code 68
- (s#W Character Download Data 68
- Generating Label Formats 69
- Generating Records 70
- The Structure of a Record 70
- TheHeaderFields 71
- Record Structure Types 73
- Width Multiplier 76
- Height Multiplier 76
- (continued) 82
- 10K OHM 1/4 WATT 83
- ‘C’ Language Program 84
- ASCII text file 84
- VB Application Generating DPL 85
- Appendix D 100
- Appendix E 101
- (E2) ISO 8859/2 Latin 2 Set 102
- (E5) ISO 8859/5 Latin 5 Set 102
- (LG) Legal Symbol Set 103
- 0123456789ABCDEF 106
- (VU) Ventura US Symbol Set 108
- Appendix F 111
- Appendix G 113
- W1z / W1Z: MicroPDF417 137
- Appendix H 141
- Specifications (optional) 142
- Standard internal fonts 142
- Appendix I 143
- Character Map Selection 145
- Appendix J 147
- Appendix K 149
- Appendix L 151
- Table L-1 152
- Appendix M 153
- Figure M-2: Sample Label 154
- Appendix N 155
- Appendix O 157
- ILPC-KANJI Option 158
- Appendix H for details) 158
- Appendix P 163
- Appendix Q 165
- Appendix R 167
- Glossary 169
Related products and manuals for Label printers Datamax E4203
Label printers Datamax PE User Manual
(100 pages)
(100 pages)
Label printers Datamax H-4606X Operator's Manual
(186 pages)
(186 pages)
Label printers Datamax H-4310 Specifications
(20 pages)
(20 pages)
(4 pages)© 2020, manymanuals.com. All rights reserved. | 0.560 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals