Datamax E4203 User Manual Page 165

  • Download
  • Add to my manuals
  • Print
  • Page
    / 176
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 164
E-Class DPL Programmer’s Manual 155
Appendix Q
E-CLASS 4203 / 4304 Statement of Compatibility
The E4203, E4204, and E4304, printers have been designed to be compatible with the Ovation2 printer.
The firmware source code is shared with the Ovation2 and the DMX XL. All DPL parsing and font / bar
code / graphical imaging will perform the same. The obvious difference is the maximum print speeds.
Slight differences in the print heat tables may also be noticed.
Printer Setup The E Class operator interface is different from the Ovation2 or the DMX XL. Default
(power-up) parameters may be set that are not available on the Ovation2. These include printer speeds,
start of print adjust, continuous label length, and others (refer to the Operator’s Manual for the entire
list). Also, refer to the Operator’s Manual for thermal transfer / direct print setup.
The E Class supports the Scalable Font Engine, which the Ovation2 does not. There are no scalable fonts
installed in the standard E Class configuration, but the printer will accept and print TrueType fonts like
the DMX XL.
Page view 164
1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 175 176

Comments to this Manuals

No comments