Datamax E4203 User Manual download pdf (Page 52)

Label-Formatting Commands

42 E-Class DPL Programmer’s Manual

D Set Dot Size Width and Height

This command is used to change the size of the printed dots of the printhead (print resolution). By

changing the height of the dots, the maximum length of a label can be increased or decreased. See

Appendix J.

 Note: D22 is the default value for all printers.

Syntax:

Dwh

Where:

- Is Dot Width multiplier 1 or 2.

- Is Dot Height multiplier 1, 2, or 3.

E Terminate Label-Formatting Mode and Print

This command causes the printer, when the processing Label-Formatting commands, to terminate the

Label-Formatting Mode then generate, print, and feed a label. The label generated will be based on

whatever data has been received to that point, even if no printable data has been received. Other

termination commands are ‘X’ and ‘s’. Commands sent to the printer after the Terminate Label

command must be of the Immediate, System-Level, or Font Download type.

Syntax:

Sample:

121100000000000Testing<CR>

E<CR>

The sample label format will print one label.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 175 176

No comments

Datamax E4203 User Manual Page 52