Datamax E4203 User Manual Page 127
- Page / 176
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Appendix G
E-Class DPL Programmer’s Manual 117
Field Valid Inputs Meaning
kkk
9,11,13…49. ECC 140
minimum is 15.
A 3 digit odd number (or 000) of rows requested. 000 causes rows to be
automatically determined. If the rows and columns do not match, the
symbol will be sized to a square using the greater of the two values.
lll
9,11,13…49. ECC 140
minimum is 15.
A 3 digit odd number (or 000) of columns requested. 000 causes
columns to be automatically determined. If the rows and columns do
not match, the symbol will be sized to a square using the greater of the
two values.
mm…m
8-bit data, followed by a
termination character.
Data to be encoded.
ECC 200 symbols: There are 24 square symbol sizes available, which may be specified in fields kkk
and lll, measured in modules as indicated below. If an ECC 200 symbol is specified with odd
numbers of rows or columns, the next largest even value will be used. Input values greater than 144
or less than 10 will cause the symbol to be automatically sized for the input character stream. The
record structure is expanded for visual clarity.
Record Structure: a W1 b c d eee ffff gggg [hhhh] iii j kkk lll mm…m
Where:
Field Valid Inputs Meaning
a
1,2,3, and 4 Rotation
W1
W1 Fixed value, extended barcode set
b
candC Lowercase selects the DataMatrix bar code, variable length
Uppercase selects the Datamatrix barcode with a Byte Count Specifier
c
1to9andAtoO Module size horizontal multiplier
d
1to9andAtoO Module size vertical multiplier
eee
000 to 999 No Effect; Must be numeric
ffff
0000 to 9999 Label position, row
gggg
0000 to 9999 Label position, column (see Appendix J)
[hhhh]
0000 to 9999 Optional string length specifier. Field termination is set by this byte
count. This decimal value includes all of the data following this byte
count field, but does not include itself.
iii
200 Reed-Solomon error correction.
j
0 Fixed value, not used
kkk
10, 12, 14, 16, 18, 20, 22,
24, 26, 32, 36, 40, 44, 48,
52, 64, 72, 80, 88, 96,
104, 120, 132, 144
A 3 digit even number (or 000) of rows requested. 000 causes rows to
be automatically determined. If the rows and columns do not match, the
symbol will be sized to a square using the greater of the two values.
lll
10, 12, 14, 16, 18, 20, 22,
24, 26, 32, 36, 40, 44, 48,
52, 64, 72, 80, 88, 96,
104, 120, 132, 144
A 3 digit even number (or 000) of columns requested. 000 causes
columns to be automatically determined. If the rows and columns do
not match, the symbol will be sized to a square using the greater of the
two values.
mm…m
8-bit data, followed by a
termination character.
Data to be encoded.
Sample 1: The variable length example encodes “DATAMAX” using a module multiplier of 4, with
an error correction level of 80, automatic encodation and determination of rows and
columns, and then a prints the bar code. A line of text is also printed.
- Programmer’s Manual 1
- Part Number: 88-2265-01 2
- Revision: D 2
- Table of Contents 3
- Appendix A 8
- Appendix B 8
- Appendix C 8
- Getting to Know the Printer 13
- Control Codes 15
- Immediate Commands 17
- SOH B Toggle Pause 18
- SOH C Stop/Cancel 18
- SOH D SOH Shutdown 18
- SOH E Send Batch Quantity 19
- SOH F Send Status Byte 19
- System-Level Commands 21
- STX d Set Double Buffer Mode 23
- STX e Select Edge Sensor 24
- STX F Form Feed 24
- STX G Print Last Label Format 24
- STX I Image Downloading 25
- STX k Test RS-232 Port 26
- STX m Set Metric Mode 27
- STX o Cycle Cutter 28
- STX p Controlled Pause 28
- STX Q Clear All Modules 29
- STX q Clear Module 29
- STX S Set Feed Speed 29
- STX s Set Single Buffer Mode 30
- STX T Print Dot Pattern Label 30
- STX t Test DRAM Memory Module 30
- STX X Set Default Module 34
- STX x Delete File from Module 35
- STX Y Output Sensor Values 35
- STX y Select Font Symbol Set 36
- STX z Pack Module 36
- Extended System Commands 37
- STX Kb Backfeed Time Delay 38
- STX KC Get Configuration 39
- STX Kc Set Configuration 39
- STX KD Database Configuration 43
- STX KE Character Encoding 44
- STX Kf Set Present Distance 46
- Label-Formatting Commands 49
- A Set Format Attribute 50
- C Set Column Offset Amount 51
- F Font Attributes 53
- H Select Heat Setting 55
- M Select Mirror Mode 55
- P Set Print Speed 56
- Q Set Print Quantity 57
- R Set Row Offset Amount 58
- S Set Slew Speed 59
- Embedding 62
- ^ Set Count by Amount 64
- STX T Print Time and Date 65
- Font Loading Commands 67
- *c###E Character Code 68
- (s#W Character Download Data 68
- Generating Label Formats 69
- Generating Records 70
- The Structure of a Record 70
- TheHeaderFields 71
- Record Structure Types 73
- Width Multiplier 76
- Height Multiplier 76
- (continued) 82
- 10K OHM 1/4 WATT 83
- ‘C’ Language Program 84
- ASCII text file 84
- VB Application Generating DPL 85
- Appendix D 100
- Appendix E 101
- (E2) ISO 8859/2 Latin 2 Set 102
- (E5) ISO 8859/5 Latin 5 Set 102
- (LG) Legal Symbol Set 103
- 0123456789ABCDEF 106
- (VU) Ventura US Symbol Set 108
- Appendix F 111
- Appendix G 113
- W1z / W1Z: MicroPDF417 137
- Appendix H 141
- Specifications (optional) 142
- Standard internal fonts 142
- Appendix I 143
- Character Map Selection 145
- Appendix J 147
- Appendix K 149
- Appendix L 151
- Table L-1 152
- Appendix M 153
- Figure M-2: Sample Label 154
- Appendix N 155
- Appendix O 157
- ILPC-KANJI Option 158
- Appendix H for details) 158
- Appendix P 163
- Appendix Q 165
- Appendix R 167
- Glossary 169
Related products and manuals for Label printers Datamax E4203
Label printers Datamax PE User Manual
(100 pages)
(100 pages)
Label printers Datamax H-4606X Operator's Manual
(186 pages)
(186 pages)
Label printers Datamax H-4310 Specifications
(20 pages)
(20 pages)
(4 pages)© 2020, manymanuals.com. All rights reserved. | 0.677 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals