Datamax E4203 User Manual Page 75
- Page / 176
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Generating Label Formats
E-Class DPL Programmer’s Manual 65
Field Valid Inputs Meaning
ffff
0000 to 9999 Row
gggg
0000 to 9999, s
ee Appendix J. Column
hhhh
P004-P999, 0016-4163* Character Height, points, dots
iiii
P004-P999, 0014-4163* Character Width, points, dots
jj…j
Valid ASCII character string up to 255 characters
followed by a termination character.
Data
*Character size specifications are printhead resolution dependent as shown in the following table.
Table 8-8: Scalable Font Record Structure
Character Size (dots)Printhead
Resolution (DPI)
Width Height
203 16-2817 16-2817
300 14-4163 16-4163
Table 8-9: Scalable Character Size Ranges
Note: A scalable font cache must be allocated to print. Minimum cache size is 15 (see
<STX>KS for syntax). Double-byte fonts require five additional units of cache.
4. Bar Codes
Valid inputs for the bar code field b are letters. Uppercase letters will print a human-readable text
below the bar code. Lowercase letters will print the bar code only. For example, entering a ‘p’ in
the b field selects the Postnet bar code. Because the Postnet font does not provide human-readable
data, the uppercase P is not valid. Other bar codes without a human-readable counterpart include u
(MaxiCode), z (PDF417), etc. See Appendix F.
For module-based bar codes, field d is the narrow bar width in dots (bar code module size). For
consistent results in all rotations for bar codes of this type, field d and field c must have the same
value. For ratio-based bar codes field c is the wide bar width in dots (the numerator); field d is the
narrow bar width in dots (the denominator). The eee height field represents the bar code height.
The valid range is from 001 to 999, which translates to bar heights ranging from 0.01inch
(.254mm) to 9.99 inches (253.7mm). Bar codes that require additional parameters specified use the
jj…j data field as the location for these parameters. See the Appendix G for specific bar code
details.
Field Valid Inputs Meaning
a
1, 2, 3 and 4 Rotation
b [bb]
A to Z and a to z (except P, u, v, z), or Wna, where: n is 1 to 9
andaisAtoSandatos.Nonisanimplied1.
Bar Code
c
1to9andAtoO WideBar
d
1to9andAtoO NarrowBar
eee
001 to 999 Symbol Height
ffff
0000 to 9999 Row
gggg
0000 to 9999,
see Appendix J. Column
jj…j
Valid ASCII character string up to 255 characters followed by a
termination character.
Data
Table 8-10: Bar Code Record Structure
- Programmer’s Manual 1
- Part Number: 88-2265-01 2
- Revision: D 2
- Table of Contents 3
- Appendix A 8
- Appendix B 8
- Appendix C 8
- Getting to Know the Printer 13
- Control Codes 15
- Immediate Commands 17
- SOH B Toggle Pause 18
- SOH C Stop/Cancel 18
- SOH D SOH Shutdown 18
- SOH E Send Batch Quantity 19
- SOH F Send Status Byte 19
- System-Level Commands 21
- STX d Set Double Buffer Mode 23
- STX e Select Edge Sensor 24
- STX F Form Feed 24
- STX G Print Last Label Format 24
- STX I Image Downloading 25
- STX k Test RS-232 Port 26
- STX m Set Metric Mode 27
- STX o Cycle Cutter 28
- STX p Controlled Pause 28
- STX Q Clear All Modules 29
- STX q Clear Module 29
- STX S Set Feed Speed 29
- STX s Set Single Buffer Mode 30
- STX T Print Dot Pattern Label 30
- STX t Test DRAM Memory Module 30
- STX X Set Default Module 34
- STX x Delete File from Module 35
- STX Y Output Sensor Values 35
- STX y Select Font Symbol Set 36
- STX z Pack Module 36
- Extended System Commands 37
- STX Kb Backfeed Time Delay 38
- STX KC Get Configuration 39
- STX Kc Set Configuration 39
- STX KD Database Configuration 43
- STX KE Character Encoding 44
- STX Kf Set Present Distance 46
- Label-Formatting Commands 49
- A Set Format Attribute 50
- C Set Column Offset Amount 51
- F Font Attributes 53
- H Select Heat Setting 55
- M Select Mirror Mode 55
- P Set Print Speed 56
- Q Set Print Quantity 57
- R Set Row Offset Amount 58
- S Set Slew Speed 59
- Embedding 62
- ^ Set Count by Amount 64
- STX T Print Time and Date 65
- Font Loading Commands 67
- *c###E Character Code 68
- (s#W Character Download Data 68
- Generating Label Formats 69
- Generating Records 70
- The Structure of a Record 70
- TheHeaderFields 71
- Record Structure Types 73
- Width Multiplier 76
- Height Multiplier 76
- (continued) 82
- 10K OHM 1/4 WATT 83
- ‘C’ Language Program 84
- ASCII text file 84
- VB Application Generating DPL 85
- Appendix D 100
- Appendix E 101
- (E2) ISO 8859/2 Latin 2 Set 102
- (E5) ISO 8859/5 Latin 5 Set 102
- (LG) Legal Symbol Set 103
- 0123456789ABCDEF 106
- (VU) Ventura US Symbol Set 108
- Appendix F 111
- Appendix G 113
- W1z / W1Z: MicroPDF417 137
- Appendix H 141
- Specifications (optional) 142
- Standard internal fonts 142
- Appendix I 143
- Character Map Selection 145
- Appendix J 147
- Appendix K 149
- Appendix L 151
- Table L-1 152
- Appendix M 153
- Figure M-2: Sample Label 154
- Appendix N 155
- Appendix O 157
- ILPC-KANJI Option 158
- Appendix H for details) 158
- Appendix P 163
- Appendix Q 165
- Appendix R 167
- Glossary 169
Related products and manuals for Label printers Datamax E4203
Label printers Datamax PE User Manual
(100 pages)
(100 pages)
Label printers Datamax H-4606X Operator's Manual
(186 pages)
(186 pages)
Label printers Datamax H-4310 Specifications
(20 pages)
(20 pages)
(4 pages)© 2020, manymanuals.com. All rights reserved. | 1.293 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals