Datamax H-4606X Operator's Manual download pdf (Page 36)

26 H-Class

C. Lower the Printhead Assembly then rotate the Printhead Latch completely clockwise.

D. If necessary, return to Media Loading to complete the setup process; otherwise,

close the cover. With READY displayed, press and hold the FEED Key until at least

one gap (or mark) advances; see Section 3.4.

;

If using REFLECTIVE or CONTINUOUS media, select the appropriate SENSOR

TYPE; see Section 4.2.1.

3.3 Ribbon Loading

Ribbon, required when printing on thermal transfer media, should be loaded as follows:

;

The use of ribbon slightly wider than the media (and liner, if any) is recommended

to help protect against abrasive wear.

A. Rotate the Printhead Latch counterclockwise then raise the Printhead Assembly.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 185 186

No comments

Datamax H-4606X Operator's Manual Page 36